With nCap-PS protective filter cap.
Attention: each nSens sensor is connected to a 1 nLink-Modbus
required for connection...
Input:
1 nSens sensor (ENS, CSS, T etc)
Output:
M12 connector RS485 (Modbus A&B, Voltage +-)
Heated humidity sensor for condensing environment
Digital humidity & temperature sensor with heated, electro lytic humidity sensor & NTC temperature measurement. Ideal for high humidity applications (95-100%).
Including 5 points factory certificate and nCap-PS protective filter cap.
Attention: Cannot be used with NovaZone.
Capacitive measurement technology for comfort air conditioning
Digital humidity & temperature sensor with capacitive humidity sensor.
CSS probe with nCap-E (without filter) CSP probe with nCap-P (with protective filter)
The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.
Separate calibration/adjustment kit with software available.
Capacitive measurement technology for comfort air conditioning
Digital humidity & temperature sensor with capacitive humidity sensor.
CSS probe with nCap-E (without filter) CSP probe with nCap-P (with protective filter)
The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.
Separate calibration/adjustment kit with software available.
Digital temperature probe with NTC temperature measurement.
The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.
Separate calibration/adjustment kit with software available.
Measured value – Simulator
Simulation plug for the output of fixed values for relative humidity and temperature.
The fixed values are set using the calibration software nSoft-CAL available separately.
For loop checks as well as testing and validation of systems.
260 1135 Bus cable 2 meter
260 1349 Bus cable 10 meters
To connect the nLink Modbus adapter to the Modbus
Network
– Adapter side with M12 screw plug
– Network side with 4 open cable ends
Cable length: 2m / 10 m
Weight: approx. 100 g
Connector: M12 thread for
nLink Modbus
4 wire ends for connection to Modbus
Thank you for your interest in our products.
Do you have questions or concerns about the applications or the product?
Please use our contact form to contact us. We will deal with your request as soon as possible and get back to you by mail or phone.