Menu

QuantaDat / nSens

Multisensor measuring system with intelligent and robust humidity/temperature sensors and analog signal outputs.

The QuantaDat offers the user a cost-optimized solution thanks to the possibility of connecting up to 4 external nSens-HT humidity/temperature sensors to one transmitter.

 

  • Reduced costs per measuring point thanks to multi-sensor architecture
  • Above-average measurement accuracy, reproducible measurement, no hysteresis
  • Linear and fast response up to the moisture saturation limit
  • Automatic sensor recognition
  • Graphics-capable, illuminated display
  • Replaceable sensor with stored calibration data memory

nSens-HT-ENS

2601771
Electrolytic measurement technology for highest demands. Included as standard in the ClimMate set.
Heated humidity sensor for condensing environment
Digital humidity & temperature sensor with electrolytic humidity sensor & NTC temperature measurement.
With nCap-PS protective filter cap.
The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.
Separate calibration/adjustment kit with software available.

 

Trigger the fancybox

nSens-HT-ENH

2601771

Heated humidity sensor for condensing environment

Digital humidity & temperature sensor with heated, electro lytic humidity sensor & NTC temperature measurement. Ideal for high humidity applications (95-100%).

Including 5 points factory certificate and nCap-PS protective filter cap.

Attention: Cannot be used with NovaZone.

Trigger the fancybox

nSens-HT-CSS

260 1582

Capacitive measurement technology for comfort air conditioning

Digital humidity & temperature sensor with capacitive humidity sensor.

CSS probe with nCap-E (without filter) CSP probe with nCap-P (with protective filter)

The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.

Separate calibration/adjustment kit with software available.

Trigger the fancybox

nSens-HT-CSP (with Protective Filter)

260 1659

Capacitive measurement technology for comfort air conditioning

Digital humidity & temperature sensor with capacitive humidity sensor.

CSS probe with nCap-E (without filter) CSP probe with nCap-P (with protective filter)

The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.

Separate calibration/adjustment kit with software available.

Trigger the fancybox

nSens-T-NBS

260 1172

Digital temperature probe with NTC temperature measurement.

The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.

Separate calibration/adjustment kit with software available.

Trigger the fancybox

nSens-VAL-HT

260 1126

Measured value – Simulator

Simulation plug for the output of fixed values for relative humidity and temperature.

The fixed values are set using the calibration software nSoft-CAL available separately.

For loop checks as well as testing and validation of systems.

Trigger the fancybox

nSens Cable with 3-wire cable ends

260 1083

Cable 3*0.5mm2, very resistant, halogen free and with quick connector for nSens-HT and nSens-T probe.

Sensor side with cable plug, transmitter side with 3 wire end sleeves for easier terminal entry.

Note:
Wall clip and duct flange available separately. (Art.No. 260 1083)

Trigger the fancybox

nSens-Cale Extension Cable Length

Cable 3*0.5mm2, very resistant, halogen free and with 2 quick couplings.

with each:
– 1 plug to nSens-HT / nSens-T probe – 1 plug to nSens cable Cable plug

Trigger the fancybox

nSens Extension for Duct Mounting

2601651

Compatible with all nSens sensors and nSens cables.

Trigger the fancybox

External Power Supply Unit

2524210

External power supply unit with exchangeable plug inserts EU/US/JP

Input: For voltage range from 90…264 VAC

Output: +24 VDC

Trigger the fancybox

nSoft-CAL Calibration Set

2601094
Windows based software for calibration and adjustment of nSens probes on the PC. Runs on Windows 98/2000/XP/Vista/Windows 7 and 8.
Set includes:

  • 1 nlink USB cable (1.8m) for all nSens sensors
  • Software adjustment of the nSens sensors

Software Download 

Trigger the fancybox

Thank you for your interest in our products.

Do you have questions or concerns about the applications or the product?

Please use our contact form to contact us. We will deal with your request as soon as possible and get back to you by mail or phone.