Menu

nLink-Modbus (RTU/RS485)

Communication adapter for all nSens sensors on Modbus
RTU, RS485 with 5-12VDC supply.

Attention: each nSens sensor is connected to a 1 nLink-Modbus
required for connection...

Input:
1 nSens sensor (ENS, CSS, T etc)

Output:
M12 connector RS485 (Modbus A&B, Voltage +-)

  • Allows all climate and diagnostic data of the connected nSens sensors to be read out.
  • Configuration of the adapter via Modbus or nCom485 set from Novasina
  • compatible with all nSens-HT probes (incl. factory certificate)

nSens-HT-ENS

2601771
Electrolytic measurement technology for highest demands. Included as standard in the ClimMate set.
Heated humidity sensor for condensing environment
Digital humidity & temperature sensor with electrolytic humidity sensor & NTC temperature measurement.
With nCap-PS protective filter cap.
The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.
Separate calibration/adjustment kit with software available.

 

Trigger the fancybox

nSens-HT-ENH

2601771

Heated humidity sensor for condensing environment

Digital humidity & temperature sensor with heated, electro lytic humidity sensor & NTC temperature measurement. Ideal for high humidity applications (95-100%).

Including 5 points factory certificate and nCap-PS protective filter cap.

Attention: Cannot be used with NovaZone.

Trigger the fancybox

nSens-HT-CSS

260 1582

Capacitive measurement technology for comfort air conditioning

Digital humidity & temperature sensor with capacitive humidity sensor.

CSS probe with nCap-E (without filter) CSP probe with nCap-P (with protective filter)

The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.

Separate calibration/adjustment kit with software available.

Trigger the fancybox

nSens-HT-CSP (with Protective Filter)

260 1659

Capacitive measurement technology for comfort air conditioning

Digital humidity & temperature sensor with capacitive humidity sensor.

CSS probe with nCap-E (without filter) CSP probe with nCap-P (with protective filter)

The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.

Separate calibration/adjustment kit with software available.

Trigger the fancybox

nSens-T-NBS

260 1172

Digital temperature probe with NTC temperature measurement.

The adjustment points are stored directly in the sensor. The sensor is pluggable and can be exchanged very quickly and easily.

Separate calibration/adjustment kit with software available.

Trigger the fancybox

nSens-VAL-HT

260 1126

Measured value – Simulator

Simulation plug for the output of fixed values for relative humidity and temperature.

The fixed values are set using the calibration software nSoft-CAL available separately.

For loop checks as well as testing and validation of systems.

Trigger the fancybox

nSens Extension for Duct Mounting

2601651

Compatible with all nSens sensors and nSens cables.

Trigger the fancybox

nSens Cable for Modbus

260 1135 Bus cable 2 meter
260 1349 Bus cable 10 meters

To connect the nLink Modbus adapter to the Modbus
Network

– Adapter side with M12 screw plug
– Network side with 4 open cable ends

Technical data:

Cable length: 2m / 10 m
Weight: approx. 100 g
Connector: M12 thread for
nLink Modbus

4 wire ends for connection to Modbus

Trigger the fancybox

nSoft-CAL Calibration Set

2601094
Windows based software for calibration and adjustment of nSens probes on the PC. Runs on Windows 98/2000/XP/Vista/Windows 7 and 8.
Set includes:

  • 1 nlink USB cable (1.8m) for all nSens sensors
  • Software adjustment of the nSens sensors

Software Download

Trigger the fancybox

Thank you for your interest in our products.

Do you have questions or concerns about the applications or the product?

Please use our contact form to contact us. We will deal with your request as soon as possible and get back to you by mail or phone.